Paper
6 November 2019 Fabrication antennas with 2D and 3D printing technologies: review
Author Affiliations +
Proceedings Volume 11176, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2019; 1117658 (2019) https://doi.org/10.1117/12.2536828
Event: Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2019, 2019, Wilga, Poland
Abstract
The article contains a review of the achievements in the field of unconventional methods of antenna production. In particular, it concerns solutions based on 3D printing methods, screen printing, and ink-jet printing. The focus is on microwave antennas, whose widespread use in modern electronic devices for data transmission, as well as parasitic activity, allows us to assume faster implementation. Attention has been drawn to the new possibilities offered by the abovementioned methods in terms of adjusting the shape and materials used. This, in turn, affects the change of mechanical properties of the antennas. It allows to use the resulting antennas for new devices, requiring adjustment to specific working conditions.

The paper also presents more classical ways of producing antennas with a similar range of operation. This, in turn, allows for easier comparison of the collected results with the results obtained for commonly used methods.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dariusz T. Grudziński and Marcin Słoma "Fabrication antennas with 2D and 3D printing technologies: review", Proc. SPIE 11176, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2019, 1117658 (6 November 2019); https://doi.org/10.1117/12.2536828
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Antennas

Printing

Laser sintering

3D printing

Fused deposition modeling

Carbon nanotubes

Manufacturing

Back to Top