|
1.INTRODUCTIONSpectrometers are used to measure the light spectra. From spectra one can determine characteristics of the source or media where the radiation went through. There are many applications of spectrometers, for example, in environment monitoring - for air and water quality monitoring, remote sensing and volcanic research1. There was about 7.5 billion $ market of global spectroscopy in 2014 and estimated to be 9.55 billion $ market in 20192. Typical spectrometers use prisms or diffraction grating to expand light spectra in space and then use the array of photodiodes or CCD matrices to measure corresponding intensities3. The largest limiting factors for using them in daily applications are their size (no less than few centimeters) and their price (miniature spectrometers with 1 nm resolution costs above 1500 EUR). Spectroscopy market is very competitive and there are a lot of spectrometer manufacturers in Europe, United States and Japan. At the same time, production of such key spectrometer components as light detectors is mostly controlled by Japanese companies Hamamatsu, Sony and Toshiba. For a European company to enter the spectrometer detector manufacturing business it would require significant investments. At this point, Japanese companies own almost all the know-how and patents to produce low cost detectors with superb technical specifications. The only way to enter the market is with a disruptive technology. A new technology was developed theoretically in National Polytechnic University of Armenia where a single diode is used as a spectrometer, and incident light spectra is reconstructed from Current-Voltage characteristic of the diode4-8. Such diode spectrometer is expected to have 200 – 1200 nm measuring range and 1 nm resolution, the same as currently available USB spectrometers. Main advantages of a diode spectrometer compared to an array based detectors are: smaller size achieved by removing the optical path and diffraction gratings, more robust alignment possible as no optical components are present, better sensitivity as no filters, optical paths or diffraction gratings are used, reduced price as no optical components are required. Therefore the proposed diode spectrometer is a good candidate to substitute currently available miniature spectrometers. Due to its miniature size it can be a candidate for first integrated spectrometer for mobile phones. The design and actual manufacture of proposed diode spectrometer was made by RD Alfa microelectronics. Several iteration of design and tests were made. Results of the third design are described below. 2.THEORETICAL MODELThe principle of a novel diode spectrometer is realized by silicon semiconductor structure with oppositely directed Schottky barrier and n-p junction, where n-region is the base8 (Figure 1 a). The structure is irradiated by an external light source. The point xm of the minimum of the potential barrier can be shifted by external voltage U. On the other side the depth in which the light radiation of a certain wavelength can permeate the structure of semiconductor depends on its wavelength giving larger depth for larger wavelengths (see Figure 1b). By changing a voltage U one can detect the sum of spectra observed in a region xm – d as dependent on xm and thus on the wavelengths observed. This spectral sum forms a current I. Hence Current-Voltage dependence gives characteristics of the light spectra. To derive the incident light spectra from the Current-Voltage dependence of the diode the following procedure can be used. Current-Voltage characteristics gives measurement data points Ii and Ui, where i changes from 1 to N, covering all the measurement range. Depth for the minimum of the potential is calculated by a formula: where d – thickness of diode zone, ε - relative dielectric permeability, ε0 – vacuum dielectric permeability, Nd – the concentration of donor impurities, q – electron charge, φ - potential of an electric field, Ui – external Voltage. In each data point absorption coefficient αi can be determined as: And reconstructed radiation flux F0i at a certain point i is: Tables can be used to determine what wavelength λi corresponds to an absorption coefficient αi in the specific structure9. Hence we get pairs of data points F0i and λi which become the reconstructed spectra of the incident light. 3.EXPERIMENTSRD Alfa Microelectronics made a design, production and tests of the spectrometer proposed by theory. The proposed structure realized in experiment is given in Figure 2. Diffusion formulas were used to determine necessary condition for the production of the structure – ion alloyage doze (Q), temperature of the process (T), duration of the process (t) for each layer preparation. Conductivity type, material and some characteristics of layers of the diode spectrometer structure are given in Table 1. Table 1.Parameters of layers of a diode spectrometer structure.
The appearance of the chip of the diode is given in Figure 3a. The chip was placed in the shielding, transparent window was added that realize hermeticity of the structure (Figure 3b-3d). Diode spectrometer chip was irradiated by several light sources: a) blue photodiode (LL-304BC-B4-2BC) with spectral peak at 468 nm and peak width at half maximum 23 nm, b) green photodiode (L-53GC) with spectral peak at 565 nm and peak width at half maximum 30 nm, c) red photodiode (L-813SRC-J4) with spectral peak at 660 nm and peak width at half maximum 20 nm, d) white light photodiode (ll-1003wc-w2-1b), e) xenon lamp (ERNEST LEITZ Gmbh Wetzlar; model XBO/CSX) with power 150 W. Current-Voltage characteristics were measured by B2912A Precision Source / Measure Unit with N1295A test fixture (Voltage resolution 1 μV in region ± 2 V, with accuracy (% reading + offset) of ±(0.02 % + 350 μV); Current measurement resolution 100 pA in region ± 100 μA, accuracy (% reading + offset) of ±(0.02 % + 25 nA)). Voltage was changed in region - 5 to +5 V with a step 1 mV. Theoretical calculations were used to reconstruct initial spectra from Current-Voltage characteristics. 4.RESULTSAt first a photo responsiveness of the diode structure was determined. Xenon lamp was used as an initial light source when +5V is set on a diode. A spectral zone of about 6 nm width was cut from xenon spectra by spectrometer Jobin Yvon Triax320 with diffraction grating 600 lines/mm. The central peak of this zone was set to 300, 400, …, 1100 and 1200 nm and measurements were made. Obtained data are seen in Figure 4. Largest signal was observed at 900 nm position. In this position a Xenon lamp has a peak of an intensity. The responsiveness of 10 - 70 μA is a good response which shows that the structure works. The spectrometer diode was irradiated separately by white, blue and red photodiode and Xenon lamp, and Current-Voltage characteristics were observed (Figure 5). The observed current was above 10 μA for all these light sources when external Voltage of +0.5 V was applied. The largest signal was observed when diode was irradiated by white photodiode. Green photodiode initiated a current of 0.4 μA on the spectrometer diode when + 0.5 V was applied. Dark current was about 2.2 nA for voltage +0.5 V. Therefore the signal was at least 200 - 5000 times larger than the noise. Theory was applied to reconstruct initial light spectra. In Figure 6 initial spectra (red) and reconstructed spectra (blue) is given, when structure was irradiated by green photodiode. In Figure 7a-7b we see initial spectra (red) and reconstructed spectra (blue), when structure was irradiated by blue and red photodiodes respectively. Results show that calculations can’t reconstruct the shape of an initial spectra, although they reveal signal peaks that corresponds to maximums of initial spectra with about 20 - 30 nm accuracy for green and blue irradiation and about 50 - 100 nm accuracy for red light irradiation. 5.DISCUSSION5.1Discussion on accuracy of measurementsLow accuracy of measurements may be the reason for inaccurate reconstruction of measurement data. Determination of the precision and accuracy of Voltage U. For calculation a case is chosen when U = + 0.9 V and green photodiode was irradiated on the spectrometer diode. According to the specification of the apparatus, precision and accuracy of a voltage was ΔU~ (1μV+0.02%*0.9+350 μV) = (1μV+180 μV +350 μV) = 531 μV (we estimated that ΔU = precision + accuracy (% reading + offset)). In measurements we used voltage step 1000 μV, which is close to the accuracy of the apparatus. Precision for the determination of αi is dependent on the precision of xi - xi+1 (see Formula 2). This subtraction is dependent on the precision of Voltage (see Formula 1). Therefore αi potentially can have large relative error which comes from uncertainty of voltage. This precision can become even ~ 50% (= 531 μV / 1000 μV) if offset is take into an account and ~15% (= 181 μV / 1000 μV) when offset is not taken into account. Determination of the precision and accuracy of current I. For calculation a case is chosen when U = + 0.9 V and green photodiode was irradiated on the spectrometer diode. In this case a current was 0,4708 μA. Measurement accuracy ΔI ~ 100 pA+(0.02 %*0.4708 μA + 25 nA)= 100 pA+ 94 pA + 2500 pA= 0.0027 μA (taking into account that ΔI = precision + accuracy (% reading + offset) according to specification of a measurement equipment). Hence relative precision of current is 0.57%. In this region between 2 measurement points I changes about 0.0001 μA, which is less than the accuracy of measurements. If we use formula: where ΔIi = Ii+1 – Ii. We see that precision of αi depends on the precision of ΔIi. Hence inaccuracy of measuring I influence αi substantially. Relative error can reach up to 2700% (= 0.0027 μA/0.0001 μΑ, if the offset is taken into account) or 100 - 200% (= 0.000194 μA/0.0001 μA, if offset is not take into account). It should be concluded that measurement apparatus has large inaccuracy that formz inaccuracy of calculated signals. For better accuracy and precision one should use more precise measurement apparatus. 5.2Further development of diode spectrometerSeveral suggestions have been proposed to increase the performance of spectra reconstruction:
6.CONCLUSIONSDetector structure was designed to realize a technology of a novel diode spectrometer proposed by theory. The structure was manufactured and tested with various irradiating light sources – white, red, green and blue photodiodes and Xenon lamp. Results show that the structure gives photocurrent that is at least 200 - 5000 times larger than the dark current. Theoretical manipulations of Current-Voltage dependence give results that can be compared to initial light spectra. The calculated spectra cannot reconstruct the shape of initial spectra and give the determination of the peak of irradiation spectra with accuracy of about 20 - 100 nm. Accuracy of measurement equipment introduce errors in calculated spectra. Better measurement equipment should be used. Transcendent equations have to be used to obtain better results for reconstructed light spectra. Measurements of absorption coefficient of actual diode structure for various wavelengths are welcomed. The obtained results show that there are opportunities for the development of novel diode spectrometer, although improvement of measurement setup, the structure of the diode and calculation algorithm should be made. ACKNOWLEDGEMENTSProject was supported by European Regional Development Fund project No. 1.2.1.1/16/A/002, Research No. 13 “Research on a new generation spectroscopy: development of design and technology for production of innovative diode detector” and “Cluster Program” Project No. 3.2.1.1/16/A/016 signed between “Central Financial and Contracting Agency of the Republic of Latvia” and “Green and Smart Technology Cluster”. REFERENCES“Environmental Monitoring,”
(2018) https://oceanoptics.com/applications/environmental-monitoring/ August ). 2018). Google Scholar
“Technavio Releases New Report on Global Spectroscopy Market,”
(2016) http://www.businesswire.com/news/home/20160127005709/en/Technavio-Releases-Report-Global-Spectroscopy-Market January ). 2016). Google Scholar
Svanberg, S., Atomic and Molecular Spectroscopy, 4Springer(2004). https://doi.org/10.1007/978-3-642-18520-5 Google Scholar
Khudaverdyan, S., Khudaverdyan, D., Tsaturyan, S., Vaseashta, A.,
“New type of photodetectors with selective spectral photosensitivity,”
in Conference NATO Science for Peace and Security programme, Technological Innovations in CBRNE Sensing and Detection for Safety, Security and Sustainability,
29.1
(2012). Google Scholar
Khudaverdyan, S. Kh., Khachatryan M. G., Khudaverdyan D. S., Tsaturyan S. H. and Vaseashta A. K.,
“New Model of Spectral Analysis of Integral Flux of Radiation,”
NATO Science for Peace and Security Series B: Physics and Biophysics, 261
–269 Springer,2013). Google Scholar
Khudaverdyan, S., Vaseashta, S., Merhabyan, N.,
“Double-Channel Optical Model for Spectral Analysis of Integral Flux of Radiation,”
in International Conference Tbilisi-Spring-2014, ARW,
121
–122
(2014). Google Scholar
Khudaverdyan, S.,
“New possibilities of optical spectroscopy with nanoscale layers,”
in The 33rd ISTCKorea Workshop, HanoCon,
73
–82
(2015). Google Scholar
Khudaverdyan, S., Hovhannisyan, T., Meliqyan, N., Mehrabyan, N., Tsaturyan, S., Khachatryan, M., Vaseashta, A.,
“On the Model of Spectral Analysis of Optical Radiation,”
Journal of Electromagnetic Analysis and Applications, 8 23
–32
(2016). https://doi.org/10.4236/jemaa.2016.82003 Google Scholar
Sze, S., Physics of Semiconductor Devices, 2Wiley-Interscience, New York
(1981). Google Scholar
|