Paper
28 August 2019 Ground vibration testing of a helicopter rotor blade using optical fibre sensors
Thomas Kissinger, Simone Weber, Edmond Chehura, James Barrington, Stephen Staines, Stephen W. James, Mudassir Lone, Ralph P. Tatam
Author Affiliations +
Proceedings Volume 11199, Seventh European Workshop on Optical Fibre Sensors; 1119902 (2019) https://doi.org/10.1117/12.2538810
Event: Seventh European Workshop on Optical Fibre Sensors, 2019, Limassol, Cyprus
Abstract
The use of optical fibre Bragg gratings (FBGs) and direct fibre optic shape sensing (DFOSS) in the ground vibration testing of a full size helicopter rotor blade has been evaluated, with the performance benchmarked against measurements made using accelerometers. An array of FBGs was used to monitor the amplitudes of the mode frequencies at specific locations along the blade and DFOSS was used to measure directly the shape of the blade and to characterise its modal frequencies. While it was possible to measure modal frequencies using both approaches, DFOSS proved capable of detecting modal frequencies using a single sensor array located along the longitudinal axis of the blade.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas Kissinger, Simone Weber, Edmond Chehura, James Barrington, Stephen Staines, Stephen W. James, Mudassir Lone, and Ralph P. Tatam "Ground vibration testing of a helicopter rotor blade using optical fibre sensors", Proc. SPIE 11199, Seventh European Workshop on Optical Fibre Sensors, 1119902 (28 August 2019); https://doi.org/10.1117/12.2538810
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber Bragg gratings

Optical fibers

Adhesives

Reflectors

Structured optical fibers

3D modeling

Back to Top