Paper
12 March 2020 High power single-frequency laser output from a diffusion-bonded monolithic nonplanar Ho:YAG ring oscillator
Haojie Wang, Mingwei Gao
Author Affiliations +
Abstract
In this paper, an experimental investigation of monolithic diffusion-bonded nonplanar Ho:YAG ring oscillator(NPRO) operated at 2.09μm was presented. A theoretical thermal model for the diffusion-bonded NPRO was established, the thermal effect of the diffusion-bonded Ho:YAG NPRO and un-bonded NPRO were calculated and compared in detail. A diode-pumped Tm-YLF solid-state laser was used to pump the diffusion-bonded Ho:YAG NPRO, a stable singlefrequency output power of up to 12.5W was obtained at 2.09μm with a slope efficiency of 46.3%. The beam quality M2- factors were less than 1.3 in both x- and y- directions.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haojie Wang and Mingwei Gao "High power single-frequency laser output from a diffusion-bonded monolithic nonplanar Ho:YAG ring oscillator", Proc. SPIE 11437, 2019 International Conference on Optical Instruments and Technology: Advanced Laser Technology and Applications, 1143703 (12 March 2020); https://doi.org/10.1117/12.2541525
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thermal effects

YAG lasers

Holmium

High power lasers

RELATED CONTENT

A high power Q switched Ho YAG laser pumped by...
Proceedings of SPIE (March 12 2019)
High power slab based Tm YLF laser for in band...
Proceedings of SPIE (February 14 2008)
High power microchip solid state lasers
Proceedings of SPIE (April 29 2008)

Back to Top