Paper
26 January 2021 Analysis of factors affecting homogenization effect of homogenizing rod in laser lighting system
Yunlong Li, Yingchun Li, Haijing Zheng, Huichao Guo
Author Affiliations +
Proceedings Volume 11767, 2020 International Conference on Optoelectronic Materials and Devices; 1176702 (2021) https://doi.org/10.1117/12.2592103
Event: 2020 International Conference on Optoelectronic Materials and Devices, 2020, Guangzhou, China
Abstract
As a kind of main homogenizing device, the homogenizing rod is widely used in laser lighting system. ZEMAX software is used to simulate the light path when the length, tilt degree and aperture size of the homogenizing rod change, and the uniformity of the light spot is calculated by ZPL language in ZEMAX software. The results show that the longer the rod length is, the better the effect is. When the length reaches a certain value, the uniform effect remains unchanged; when the inclination angle is about 0.75 ° and the aperture size exceeds the light source ratio of about 250%, the effect is better Good, the conclusion provides the basis for the selection of the uniform rod in the laser lighting system.
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yunlong Li, Yingchun Li, Haijing Zheng, and Huichao Guo "Analysis of factors affecting homogenization effect of homogenizing rod in laser lighting system", Proc. SPIE 11767, 2020 International Conference on Optoelectronic Materials and Devices, 1176702 (26 January 2021); https://doi.org/10.1117/12.2592103
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top