Paper
12 March 2021 Design of plastic optical fiber for soil moisture measurements as potential landslide detector
Author Affiliations +
Proceedings Volume 11789, Fourth International Seminar on Photonics, Optics, and Its Applications (ISPhOA 2020); 117890C (2021) https://doi.org/10.1117/12.2587022
Event: Fourth International Seminar on Photonics, Optics, and Its Applications (ISPhOA 2020), 2020, Sanur, Indonesia
Abstract
It is necessary to design an instrument using optical fiber as a soil moisture sensor, which can be implemented to detect potential landslides. The paper describes the sensor design, the experimental setup and an example of sensor prototype. This study uses multimode plastic optical fiber, light source from IF E91A IR LEDs that connected with Arduino, and OPM software for data retrieval. The POF’s removed cladding is 6 cm long. Using the U-bent method with diameter variation of 35 mm, 30 mm, and 25 mm, the optical power decreases along with the increase of water content in the soil. The sensitivity obtained for 35 mm, 30 mm, and 25 mm diameter are 0.245 μWatt / %, 0.154 μWatt / %, and 0.437 μWatt / % respectively. The use of U-bent method with 25 mm diameter has a better performance because of its larger sensitivity than the other diameter variation.
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Iwan Cony Setiadi, Niza Rosyda Amalia, and Nadhifa Aqilla Husna "Design of plastic optical fiber for soil moisture measurements as potential landslide detector", Proc. SPIE 11789, Fourth International Seminar on Photonics, Optics, and Its Applications (ISPhOA 2020), 117890C (12 March 2021); https://doi.org/10.1117/12.2587022
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top