Paper
1 June 1990 Deep-ultraviolet lithography for 500-nm devices
Steven J. Holmes, Ruth Levy, Albert S. Bergendahl, Karey L. Holland, John G. Maltabes, Stephen E. Knight, Katherine C. Norris, Denis Poley
Author Affiliations +
Abstract
Each DRAM design generation has required higher reoiution imaging and overlay capability. The 500-nm lithographic ground rules of a 16-Mb chip make deep-UV (DUV) an attractive alternative to,thc more stanth,rd mid-UV (MUV) photolithography presently practiced for less demanding technologies. The shorter wavelength permits an unproved depth of focus by allowing the same resolution at smaller numerical apertures. This approach retains the simplicity of single-layer-resist processing rather th a ii forcing conversion to m ultilayer imaging.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Steven J. Holmes, Ruth Levy, Albert S. Bergendahl, Karey L. Holland, John G. Maltabes, Stephen E. Knight, Katherine C. Norris, and Denis Poley "Deep-ultraviolet lithography for 500-nm devices", Proc. SPIE 1264, Optical/Laser Microlithography III, (1 June 1990); https://doi.org/10.1117/12.20180
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications and 4 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Deep ultraviolet

Lithography

Optical lithography

Semiconducting wafers

Optical alignment

Etching

RELATED CONTENT


Back to Top