Superlattice effects and limitations of non-destructive measurement of advanced Si/Si(1-x)Ge(x) superlattice structures using Mueller matrix scatterometry (MMSE) and high-resolution x-ray diffraction (XRD)

Ezra Pasikatan; G. Andrew Antonelli; Nicholas Keller; Subhadeep Kal; Matthew Rednor; Markus Kuhn; Satoshi Murakami; Alain C. Diebold

doi:10.1117/12.3010523

9 April 2024 Superlattice effects and limitations of non-destructive measurement of advanced Si/Si_1-xGe_x superlattice structures using Mueller matrix scatterometry (MMSE) and high-resolution x-ray diffraction (XRD)

Ezra Pasikatan, G. Andrew Antonelli, Nicholas Keller, Subhadeep Kal, Matthew Rednor, Markus Kuhn, Satoshi Murakami, Alain C. Diebold

Author Affiliations +

Proceedings Volume 12955, Metrology, Inspection, and Process Control XXXVIII; 129550K (2024) https://doi.org/10.1117/12.3010523
Event: SPIE Advanced Lithography + Patterning, 2024, San Jose, California, United States

Abstract

Advanced semiconductor devices are moving toward 3D geometries due to scaling demands and performance requirements. The non-destructive metrology necessary for process control for high volume manufacturing of 3D structures must be advanced to facilitate their transition from technology development to high volume manufacturing. Optical Critical Dimensions (OCD) techniques based on Mueller Matrix Scatterometry (MMSE) as well as XxRay Diffraction (XRD) have proved capable of measuring the Si/Si_1-xGe_x few layer superlattices used to fabricate Gate All Around (GAA) transistor device test structures. The limitations of these techniques associated with superlattice device structures needed to be further understood. To understand the limits of MMSE Scatterometry and XRD, a four superlattice layer Si/Si_1-xGe_x structure was measured as a film stack, a column etched sample, and at two levels of cavity etch. XRD was used to determine individual layer thicknesses and compositions of the film stack, and electron microscope data was used to verify initial structure dimensions for OCD models. First, film stack characterization and metrology for both ellipsometry and x-ray characterization were explored. OCD modeling and measurement strategies were evaluated to address the challenge of fitting the superlattice thicknesses in the stack at different etch levels. We demonstrate the characterization of relevant test structure dimensions, including cavity etch using MMSE-Scatterometry. We also demonstrate an alternate technique, x-ray fluorescence for determining cavity etch on the same structures.

Conference Presentation

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Ezra Pasikatan, G. Andrew Antonelli, Nicholas Keller, Subhadeep Kal, Matthew Rednor, Markus Kuhn, Satoshi Murakami, and Alain C. Diebold "Superlattice effects and limitations of non-destructive measurement of advanced Si/Si_1-xGe_x superlattice structures using Mueller matrix scatterometry (MMSE) and high-resolution x-ray diffraction (XRD)", Proc. SPIE 12955, Metrology, Inspection, and Process Control XXXVIII, 129550K (9 April 2024); https://doi.org/10.1117/12.3010523

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available