Poster + Paper
17 June 2024 Fabrication of diffraction gratings using sol-gel method and imprinting method
Author Affiliations +
Conference Poster
Abstract
A titania grating with a high diffraction efficiency was fabricated using sol-gel method and imprinting technique with silicone mold. For this process, titania sol was dropped onto a silicone mold transferred from the photoresist pattern by the imprinting process, and then retransferred onto a glass substrate to form a titania diffraction grating. The first -order diffraction transmittance of the fabricated element with a 1.0-μm pitch and a depth of 0.48 μm was 31.7% at a wavelength of 632.8 nm. This grating can be fabricated without using expensive apparatuses such as reactive ion etching and molding equipment.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Itsunari Yamada "Fabrication of diffraction gratings using sol-gel method and imprinting method", Proc. SPIE 13021, Optical Fabrication and Testing VIII, 130210K (17 June 2024); https://doi.org/10.1117/12.3011435
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffraction gratings

Diffraction

Optical gratings

Fabrication

Sol gels

Back to Top