Paper
13 September 2024 An online monitoring method for embedded time-gate displacement sensor operation state base on CNN and LSTM
Li Gou, Minxuan Wang, Donglin Peng, Wanlin Fan
Author Affiliations +
Proceedings Volume 13178, Eleventh International Symposium on Precision Mechanical Measurements; 1317824 (2024) https://doi.org/10.1117/12.3032941
Event: Eleventh International Symposium on Precision Mechanical Measurements, 2023, Guangzhou, China
Abstract
In view of the problems that embedded time-gate displacement sensor (hereinafter referred to as time-gate), which has severe working conditions, high-precision state is difficult to maintain for a long time, and the operating state is difficult to monitor online. this paper proposes an online monitoring method of time-gate operating state, based on a combination of Convolutional Neural Network (CNN) and Long Short-Term Memory Network (LSTM). Firstly, feature information was obtained from the geometric, operating, electromagnetic simulation and environmental characteristics of the time-gate displacement sensor. Then, A time-gate operating state prediction model was constructed by feeding feature information into CNN-LSTM model and verified by test set, The CNN layers Perform feature learning and extraction and the LSTM layers Process timing data. Finally, the relevant real-time data are fed into the above operating state monitoring system, which achieve the real-time online Monitoring of the time-gate operation state. The experimental results show that, the extreme prediction errors such as abnormal and no alarm were avoided by this method in the test set, and the recognition accuracy of the state is up to 91.1% by this prediction model. Effectively guarantee the safe and stable operation of the time-gate and the equipment in which it is located.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Li Gou, Minxuan Wang, Donglin Peng, and Wanlin Fan "An online monitoring method for embedded time-gate displacement sensor operation state base on CNN and LSTM", Proc. SPIE 13178, Eleventh International Symposium on Precision Mechanical Measurements, 1317824 (13 September 2024); https://doi.org/10.1117/12.3032941
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Error analysis

Convolution

Data modeling

Neural networks

Calibration

Statistical modeling

Back to Top