Paper
1 July 1991 New tracking method for two-beam optical heads using continuously grooved disks
Mitsuru Irie, Nobuo Takeshita, Teruo Fujita, Kenjiro Kime
Author Affiliations +
Proceedings Volume 1499, Optical Data Storage '91; (1991) https://doi.org/10.1117/12.45927
Event: Optical Data Storage, 1991, Colorado Springs, CO, United States
Abstract
A new composite tracking method suitable for a two-beam split-type optical head is suggested. Using twin spot and push-pull tracking method, and with ana auxiliary actuator combined, this method is designed so as to be applied, in particular, to optical disks having continuous grooves. In this method, a read-out spot is controlled by the twin-spot method, and moreover an auxiliary actuator for write spot positioning is driven by a differential signal of two push-pull tracking error signals derived from read-out and write beams. To examine tracking performance of this method, we constructed a two-beam optical head and successfully confirmed that the two spots could be easily positioned on the same track center independent of +/- 100 micrometers objective lens shift.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mitsuru Irie, Nobuo Takeshita, Teruo Fujita, and Kenjiro Kime "New tracking method for two-beam optical heads using continuously grooved disks", Proc. SPIE 1499, Optical Data Storage '91, (1 July 1991); https://doi.org/10.1117/12.45927
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical tracking

Head

Actuators

Objectives

Signal detection

Optical discs

Composites

RELATED CONTENT

Tracking Servo For Small Size Optical Disk System.
Proceedings of SPIE (January 14 1987)
Multilevel volumetric optical storage
Proceedings of SPIE (October 12 1994)
Fast Access Method Of Optical Disk Memory
Proceedings of SPIE (January 01 1987)

Back to Top