Influence of diamond turning and surface cleaning processes on the degradation of KDP crystal surfaces

Mark R. Kozlowski; Ian M. Thomas; Gary J. Edwards; Kenneth A. Stanion; Baruch A. Fuchs; L. Latanich

doi:10.1117/12.50764

1 December 1991 Influence of diamond turning and surface cleaning processes on the degradation of KDP crystal surfaces

Mark R. Kozlowski, Ian M. Thomas, Gary J. Edwards, Kenneth A. Stanion, Baruch A. Fuchs, L. Latanich

Proceedings Volume 1561, Inorganic Crystals for Optics, Electro-Optics, and Frequency Conversion; (1991) https://doi.org/10.1117/12.50764
Event: San Diego, '91, 1991, San Diego, CA, United States

Abstract

One factor influencing the efficiency of KDP frequency conversion arrays on the Nova laser system at LLNL has been environmental degradation, or `fogging,' of the crystal surfaces. Decreases in array transmission by as much as 20% have been attributed to crystal fogging. The surfaces of the 27 cm square Nova array crystals are prepared by a wet diamond-turning process. The rate of surface fogging has been associated with several parameters of the diamond turning and subsequent cleaning processes. High humidity during diamond turning, storage, and use on the laser tends to accelerate the fogging. We suspect that some of the additives present in the diamond turning oil increase the fogging rate and have found a machining oil which minimizes this surface degradation. Efficient removal of the machining oils from the crystal surface also minimizes the fogging problem. Care must be taken to use cleaning solvents which do not cause additional surface degradation. The fogging rate is sensitive to the crystallographic orientation of the material as well as to surface roughness related to the diamond turning process. Accelerated fogging at diamond turning artifacts may increase crystal surface roughness causing increased beam modulation and scattering losses.

Citation Download Citation

Mark R. Kozlowski, Ian M. Thomas, Gary J. Edwards, Kenneth A. Stanion, Baruch A. Fuchs, and L. Latanich "Influence of diamond turning and surface cleaning processes on the degradation of KDP crystal surfaces", Proc. SPIE 1561, Inorganic Crystals for Optics, Electro-Optics, and Frequency Conversion, (1 December 1991); https://doi.org/10.1117/12.50764

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available