Paper
4 November 1993 Comparison between QAM-subcarrier and TDM IM/DD for HDTV distribution over optical fibers
Ken Q. Zhang, Jonas Claesson, Lars A. Johansen
Author Affiliations +
Proceedings Volume 1974, Transport Technologies for Broadband Optical Access Networks; (1993) https://doi.org/10.1117/12.161498
Event: Video Communications and Fiber Optic Networks, 1993, Berlin, Germany
Abstract
Recent years progress in video compression has made it possible to achieve HDTV-quality in bit-rates below 30 Mbit/s. This means that a few channels may be distributed over the ether but it will also affect the way of distributing video over fibers. A question of importance is whether some kind of subcarrier multiplexed scheme or a digital version is most appropriate for the distribution. A theoretical comparison has been done between these two different methods for the fiber transmission: quadrature amplitude modulation (QAM) with subcarrier multiplexing (SCM) and binary shift keying (BSK) with time division multiplexing (TDM). QAM over subcarrier may be more flexible and more compatible with the existing CATV- systems for PAL or NTSC distribution. However, TDM makes it more easy to interact with other network levels over SDH and/or ATM. The result shows that a 20 channel HDTV distribution gains about 9 dB in power budget using TDM compared to SCM when thermal noise is the limiting factor. It means that TDM can be distributed to approximately 10 times more end users.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ken Q. Zhang, Jonas Claesson, and Lars A. Johansen "Comparison between QAM-subcarrier and TDM IM/DD for HDTV distribution over optical fibers", Proc. SPIE 1974, Transport Technologies for Broadband Optical Access Networks, (4 November 1993); https://doi.org/10.1117/12.161498
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation

Signal to noise ratio

Time division multiplexing

Quadrature amplitude modulation

Receivers

Multiplexing

Optical fibers

Back to Top