Paper
26 May 1994 Plane-parallel plate method of laser localization and laser positioning
Karl J. Scheibengraber
Author Affiliations +
Abstract
Rotating a plane-parallel glass plate in a laser beam can provide precise sub-millimeter beam translation useful for intraoperative localization and laser positioning. Fine control of beam translation by this method can aid in establishing laser-defined planes of a coordinate system used to locate patient anatomy or to align a stereotactic frame. To implement this method, laser dot or line projectors can be equipped with small motor-driven glass plates at or near their output ports. The author assembled an optical system consisting of a six mm thick crown glass plate, a visible diode laser projector and a 40-step stepper motor. This combination of simple and relatively inexpensive elements produces approximately one-half mm increments of beam translation over a five mm adjustment range. Benefits include fine control and freedom from perturbations caused by contact with adjustment thumbscrews. The addition of infrared remote control would allow easy adjustment of positioning lasers in hard-to-access areas of the operating or treatment room.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Karl J. Scheibengraber "Plane-parallel plate method of laser localization and laser positioning", Proc. SPIE 2132, Clinical Applications of Modern Imaging Technology II, (26 May 1994); https://doi.org/10.1117/12.176598
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Prototyping

Projection systems

Semiconductor lasers

Beam steering

Crown glass

Radiotherapy

Back to Top