PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The lithographic performance and process applicability of the anti-reflective-layer (ARL) process using amorphous carbon have been studied in i-line and KrF excimer laser lithography. The ARL thickness of 30 nm was used. With ARL, the reflectivity from the silicon substrate reduced to less than 30%. The reduction of the reflectivity with ARL process was effective not only for the silicon substrate but also for the tungsten silicide substrate and aluminum substrate. The pattern profile and depth of focus in the resist on ARL were almost the same as those without ARL. The ARL process has been successfully applied for the fabrication of 0.35 micrometers CMOS polycide gate fabrication using i-line lithography and 0.35 micrometers DRAM aluminum wiring using excimer laser lithography.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.