Paper
20 April 1995 Experimental algorithm for detecting damage applied to the I-40 bridge over the Rio Grande
Randall L. Mayes
Author Affiliations +
Abstract
An algorithm originally used to locate errors in finite element models is applied to a full scale bridge damage detection experiment. The method requires experimental frequency response function data measured at discrete locations along the major bridge load paths. In the bridge damage application the algorithm is most effective when applied to static flexibility shapes estimated with a truncated set of six mode shapes rather than individual mode shapes. The algorithm compares `before damage' and `after damage' data to locate physical areas where significant stiffness changes have occurred. A damage indicator shows whether damage is detectable. Damage is correctly located in the two most significant damage cases using the driving point static flexibility estimates. Limitations of the technique are addressed. The damage detection experiment was performed on a three span steel girder bridge that was 425 feet long. This bridge was part of Interstate 40 across the Rio Grande. The New Mexico State University Department of Civil Engineering organized the experiment. The frequency response functions were collected by Los Alamos National Laboratories personnel. The bridge excitation was provided by Sandia National Laboratories.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Randall L. Mayes "Experimental algorithm for detecting damage applied to the I-40 bridge over the Rio Grande", Proc. SPIE 2446, Smart Structures and Materials 1995: Smart Systems for Bridges, Structures, and Highways, (20 April 1995); https://doi.org/10.1117/12.207729
Lens.org Logo
CITATIONS
Cited by 27 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Bridges

Finite element methods

Damage detection

Sensors

Detection and tracking algorithms

Beam shaping

Civil engineering

Back to Top