Paper
27 June 1996 Optical and infrared detection using microcantilevers
Patrick Ian Oden, Eric A. Wachter, Panos G. Datskos, Thomas G. Thundat, R. J. Warmack
Author Affiliations +
Abstract
The feasibility of micromechanical optical and infrared (IR) detection using microcantilevers is demonstrated. Microcantilevers provide a simple means for developing single- and multi-element sensors for visible and infrared radiation that are smaller, more sensitive and lower in cost than quantum or thermal detectors. Microcantilevers coated with a heat absorbing layer undergo bending due to the differential stress originating from the bimetallic effect. Bending is proportional to the amount of heat absorbed and can be detected using optical or electrical methods such as resistance changes in piezoresistive cantilevers. The microcantilever sensors exhibit two distinct thermal responses: a fast one ((tau) 1thermal less than ms) and a slower one ((tau) 2thermal approximately 10 ms). A noise equivalent temperature difference, NEDT equals 90 mK was measured. When uncoated microcantilevers were irradiated by a low-power diode laser ((lambda) equals 786 nm) the noise equivalent power, NEP, was found to be 3.5 nW/(root)Hz which corresponds to a specific detectivity, D*, of 3.6 multiplied by 107 cm (DOT) (root)Hz/W at a modulation frequency of 20 Hz.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Patrick Ian Oden, Eric A. Wachter, Panos G. Datskos, Thomas G. Thundat, and R. J. Warmack "Optical and infrared detection using microcantilevers", Proc. SPIE 2744, Infrared Technology and Applications XXII, (27 June 1996); https://doi.org/10.1117/12.243523
Lens.org Logo
CITATIONS
Cited by 24 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Modulation

Thermography

Infrared detectors

Infrared radiation

Infrared sensors

Coating

Back to Top