Paper
30 September 1996 Modeling of high-power cw Nd:YAG laser welding
Evelyne Dumord, Jean-Marie Jouvard, Dominique F. Grevey
Author Affiliations +
Abstract
The model developed allows to know the temperature field in a cw Nd:YAG laser joining piece. To realize the model, a physical approach has been used for defining the heat sources. First, from a pressure balance the geometry of the keyhole is determined. Then, an analysis of the plume existing at the surface of the target shows that the beam is scattered by the plume and consequently one more heat source must be considered. The spectrometric characterization indicates that no ionized particles exist in the plume and certainly in the keyhole. So Fresnel absorptions must be the predominant effects for energy absorption in the keyhole. This assumption has been verified owing to Fresnel absorption coefficient measurements.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Evelyne Dumord, Jean-Marie Jouvard, and Dominique F. Grevey "Modeling of high-power cw Nd:YAG laser welding", Proc. SPIE 2889, High-Power Lasers: Solid State, Gas, Excimer, and Other Advanced Lasers, (30 September 1996); https://doi.org/10.1117/12.253255
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Nd:YAG lasers

Continuous wave operation

Particles

Thermal modeling

High power lasers

Modeling

RELATED CONTENT

Modeling of high-power cw Nd:YAG laser welding
Proceedings of SPIE (May 02 1997)
Modeling of high-power laser welding
Proceedings of SPIE (February 01 1991)
High-power COIL and YAG laser welding
Proceedings of SPIE (May 06 2002)
High-power COIL and Nd:YAG laser welding
Proceedings of SPIE (November 10 2003)
Keyhole: modeling during cw Nd:YAG laser welding
Proceedings of SPIE (September 23 1996)
Nd:YAG laser market
Proceedings of SPIE (March 01 1991)

Back to Top