Paper
11 December 1997 Off-line quality control for Bragg-Laue optics
Richard D. Deslattes Jr.
Author Affiliations +
Abstract
On-stream performance of crystal diffraction components at synchrotron radiation facilities is certainly limited by the issues of heating and photochemistry discussed by other contributors to this conference. At the same time, the delivered performance is also limited by the quality of the starting material, strains and distortions introduced by the initial shaping and surface preparation, and by whatever re- forming operations (e.g. one and two dimensional stressing or bending) are needed to realize the desired x-ray optical function. Each of these issues, initial crystal quality, surface preparation, and final figure, can be assessed by rather simple arrangements using conventional x-ray diffraction tube sources in combination with appropriate beam conditioning elements and effective 2D imagers. These table-top arrangements represent a modest investment in comparison with realistic costs of beamline operation, but they are often neglected. An evident benefit of such off- line quality control is that on-line performance becomes predictable at least in the limit of low heating and radiation damage, so that the effects of these inevitable difficulties are more clearly isolated, thereby opening the way toward their effective management.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard D. Deslattes Jr. "Off-line quality control for Bragg-Laue optics", Proc. SPIE 3151, High Heat Flux and Synchrotron Radiation Beamlines, (11 December 1997); https://doi.org/10.1117/12.294483
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Diffraction

X-rays

X-ray optics

X-ray diffraction

Synchrotron radiation

Crystal optics

RELATED CONTENT


Back to Top