Direct-write electron-beam lithography for submicron integrated circuit fabrication

Grahame C. Rosolen; Warren D. King

doi:10.1117/12.280535

14 August 1997 Direct-write electron-beam lithography for submicron integrated circuit fabrication

Grahame C. Rosolen, Warren D. King

Proceedings Volume 3183, Microlithographic Techniques in IC Fabrication; (1997) https://doi.org/10.1117/12.280535
Event: ISMA '97 International Symposium on Microelectronics and Assembly, 1997, Singapore, Singapore

Abstract

A self-aligning direct-write electron beam lithography instrument has been developed for fabricating Gallium Arsenide integrated circuits. The electron beam is used to directly write the critical layers in these circuits. The main application is to write the gate layer in high electron mobility transistors (HEMTs). A single HEMT may contain several gate electrodes, each of which is up to 150 micrometers wide, less than 0.25 micrometers long and which must be aligned with submicron accuracy. A variety of devices have been successfully written on the instrument, which comprises a scanning electron microscope (SEM) that has been interfaced to a purpose-built pattern generator and image correlation system. The standard SEM stage has been motorized and is used to position each device within the field of view of the SEM. The pattern generator then scans the electronic beam to obtain an image of the device. This image is correlated with a reference image and the precise location of the device is calculated and used for aligning the subsequent exposure. The active alignment system achieves excellent alignment, far exceeding the accuracy of the standard SEM stage. Not only does this obviate the need for expensive stage positioning systems, but it also compensates automatically for positional errors on the sample caused by mask tolerances. As the instrument uses the image of the device for correlation, no alignment marks are required on the sample. The system is fully automated and has been sued successfully to write a variety of device geometries.

Citation Download Citation

Grahame C. Rosolen and Warren D. King "Direct-write electron-beam lithography for submicron integrated circuit fabrication", Proc. SPIE 3183, Microlithographic Techniques in IC Fabrication, (14 August 1997); https://doi.org/10.1117/12.280535

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available