In-line testing of antenna-type test structures for separation of sources of process-induced damage

Tomasz Brozek; Douglas Roberts; Thuy Dao

doi:10.1117/12.284672

2 September 1997 In-line testing of antenna-type test structures for separation of sources of process-induced damage

Tomasz Brozek, Douglas Roberts, Thuy Dao

Proceedings Volume 3215, In-Line Characterization Techniques for Performance and Yield Enhancement in Microelectronic Manufacturing; (1997) https://doi.org/10.1117/12.284672
Event: Microelectronic Manufacturing, 1997, Austin, TX, United States

Abstract

As process complexity and number of plasma processing steps increase, process-induced charging damage becomes an emerging issue in continuously scaling device manufacturing. It is important, therefore, to be able to pinpoint most of potential sources of plasma charging-induced damage. The most commonly used approach involves processing and testing of several modules of antenna-type transistors, with charge sensitive antennas defined and exposed to plasma at various stages of processing. Subsequent analysis of damage allows determination of the processing level at which most of damage occurred. This work presents an alternative and complementary approach to assess potential sources of charging damage. This approach is based on in-line testing of gate oxide integrity of a MOS transistor structure with a charge collecting antenna. Gate oxide integrity tests performed after poly-silicon salicidation and after metal-1 level are used to separate the effect of poly etch and inter-layer dielectric deposition. It is shown that by the in-line testing of silicided poly antennas the effect of charging damage due to plasma-enhanced chemical vapor deposition (PECVD) of oxide can be unambiguously determined. The fingerprint of PECVD-induced charging is further documented by the surface charge analysis performed on oxidized silicon wafers exposed to PECVD oxide deposition.

Citation Download Citation

Tomasz Brozek, Douglas Roberts, and Thuy Dao "In-line testing of antenna-type test structures for separation of sources of process-induced damage", Proc. SPIE 3215, In-Line Characterization Techniques for Performance and Yield Enhancement in Microelectronic Manufacturing, (2 September 1997); https://doi.org/10.1117/12.284672

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available