Paper
13 May 1998 Fluorescence-based temperature measurement in laser-induced vapor bubbles
Author Affiliations +
Proceedings Volume 3254, Laser-Tissue Interaction IX; (1998) https://doi.org/10.1117/12.308174
Event: BiOS '98 International Biomedical Optics Symposium, 1998, San Jose, CA, United States
Abstract
A fluorescence-based temperature probe (optrode) was designed to measure temperature within laser-induced vapor bubbles. The optrode consisted of a 400-micrometer optical fiber with a rhodamine B-doped polyurethane film attached to the fiber tip. The film exhibited a fluorescence decay time of 4 ns, and the measured fluorescence yield was temperature dependent in the range from 20 to 110 degrees Celsius. A Ho:YAG laser ((lambda) equals 2.12 micrometer, (tau) p equals 250 microseconds) with a pulse energy of 256 plus or minus 7 mJ delivered through a fiber was used to produce the vapor bubbles. The bubbles reached maximum expansion 200 microseconds after the onset of the laser pulse and had an average lifetime of 350 microseconds. The temperature was measured by positioning the optrode within the vapor bubble and exciting its fluorescent film-coated tip with a nitrogen dye laser ((lambda) equals 540 nm, (tau) p equals 500 ps). At maximum expansion, the temperatures in the vapor bubbles were approximately 61 degrees Celsius, indicating sub-atmospheric saturated vapor pressures. The vapor pressure at maximum expansion was confirmed by Rayleigh's equation.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kin Foong Chan, T. Joshua Pfefer, Daniel X. Hammer, E. Duco Jansen, Martin Frenz, and Ashley J. Welch "Fluorescence-based temperature measurement in laser-induced vapor bubbles", Proc. SPIE 3254, Laser-Tissue Interaction IX, (13 May 1998); https://doi.org/10.1117/12.308174
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Pulsed laser operation

Luminescence

Fiber lasers

Infrared radiation

Optical fibers

Laser irradiation

Back to Top