Optimal sampling strategies for sub-100-nm overlay

Bharath Rangarajan; Michael K. Templeton; Luigi Capodieci; Ramkumar Subramanian; Alec B. Scranton

doi:10.1117/12.308743

8 June 1998 Optimal sampling strategies for sub-100-nm overlay

Bharath Rangarajan, Michael K. Templeton, Luigi Capodieci, Ramkumar Subramanian, Alec B. Scranton

Proceedings Volume 3332, Metrology, Inspection, and Process Control for Microlithography XII; (1998) https://doi.org/10.1117/12.308743
Event: 23rd Annual International Symposium on Microlithography, 1998, Santa Clara, CA, United States

Abstract

Overlay control is a critical requirement of the lithographic process, and the challenge will be even greater with 0.18- micron technology, where the overlay budget is expected to shrink to 70 nm. Control of overlay is often achieved by modifying the stepping parameters to remove any correctable overlay errors. The estimated value of these parameters depends on the overlay error between the two layers, the model used, and the overlay-sampling plan. Overlay sampling strategies face the following dilemma: plans that sample overlay at the edge of the wafer or field will show atypically large overlay errors, but these plans can result in more accurate estimates of the correctable terms. Therefore when measuring overlay at these extreme points the lithographer needs to recognize that this type of sampling will typically indicate that overlay is substantially worse than it is in the average field. In this paper, a number of different sampling plans that measure 25 points on a wafer were tested. The results obtained from the various plans have been compared to the results obtained from measuring the entire wafer. The data show that the sampling pattern can have a significant effect on the values of the various correctable parameters, and that an inappropriate sampling plan can consume a significant portion of the overlay budget. We have identified several effective sampling patterns, and the improved performance of these plans is attributed to the fact that these patterns achieve greater coverage of the wafer and measure a large number of wafer (or grid) points than the other sampling plans.

Citation Download Citation

Bharath Rangarajan, Michael K. Templeton, Luigi Capodieci, Ramkumar Subramanian, and Alec B. Scranton "Optimal sampling strategies for sub-100-nm overlay", Proc. SPIE 3332, Metrology, Inspection, and Process Control for Microlithography XII, (8 June 1998); https://doi.org/10.1117/12.308743

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available