Paper
12 August 1998 Optically controlled multiple-beam-forming network for phased-array radar
Yixin Wang, Shunan Zhong, Xiaowen Xu, Shizhi Li, Liansheng Yin
Author Affiliations +
Abstract
Multiple beam forming is widely used in modern RADAR system, and it can be accomplished at radar radio frequency by using integrated opto-electronics device and optical fiber distribution and time delay network. This paper describes a receiving system of multiple beams by using integrated opto- electronics device, optical fiber distribution network and optical fiber time delay line. When the opto-electronics switch with controllable extinction ratio and optical microwave phase shifter which can make a good control of phase shifting are applied in this system, the complex weight coefficient can be effectively adjusted, and the adaptive multiple beam forming networks can be established. With the optically controlled multiple beam forming technology, the weight and volume of the system can be reduced and the anti- interference ability and stability of temperature be increased. In addition, the channel numbers can also be increased, which is especially beneficial to large phased arrays system.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yixin Wang, Shunan Zhong, Xiaowen Xu, Shizhi Li, and Liansheng Yin "Optically controlled multiple-beam-forming network for phased-array radar", Proc. SPIE 3551, Integrated Optoelectronics II, (12 August 1998); https://doi.org/10.1117/12.317978
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Radar

Phased array optics

Interference (communication)

Optical fibers

Antennas

Phased arrays

Optical networks

Back to Top