Paper
15 July 1999 Fabrication of true 3D microstructures in glass/ceramic materials by pulsed UV laser volumetric exposure techniques
Author Affiliations +
Abstract
A pulsed UV laser based technique has been developed which permits the transfer, by direct-write exposure, of 3D image into a photosensitive glass/ceramic material. The exposed latent image volume is developed via temperature programmed bake process and then etched away using HF in solution. The height of the 3D microstructures is controlled by the initial laser wavelength used during the exposure and the time duration of the etching cycle. Using this technique we have fabricated large arrays of microstructures which have applications to microfluidics, microelectromechanical systems and optoelectronics. The resulting master copy can be used either as is or by use standard injection modeling techniques converted into a metallic or plastic copies. We present these results and others which have specific applications to miniature 1Kg class satellites - nanosatellites.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter D. Fuqua, Siegfried W. Janson, William W. Hansen, and Henry Helvajian "Fabrication of true 3D microstructures in glass/ceramic materials by pulsed UV laser volumetric exposure techniques", Proc. SPIE 3618, Laser Applications in Microelectronic and Optoelectronic Manufacturing IV, (15 July 1999); https://doi.org/10.1117/12.352714
Lens.org Logo
CITATIONS
Cited by 25 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Satellites

3D microstructuring

Fabrication

Glasses

Ultraviolet radiation

Silicon

Aerospace engineering

Back to Top