Paper
26 July 1999 Effects of phase-shift masks on across-field linewidth control
Author Affiliations +
Abstract
The concept of the iso-aberration dose is introduced and defined as the dose where the 'depth of aberration' is at a maximum. By allowing patterning of small isolated lines closer to the iso-aberration dose, the use of phase shift masks (PSMs) improves critical dimension (CD) sensitivity to lithographic tool aberrations. The use of specialized photo- resist and mask assist feature is also found to improve isolated line CD sensitivity to aberrations. The improvement in aberration sensitivity from PSM results in improved across field linewidth control for some lithographic system but causes degraded CD control for other tools which are optimized for operation with standard binary reticles. Simulations show that the trim mask PSM approach has superior aberration sensitivity for patterning 100nm than multi-phase PSM approaches when the allowed phasewidth is restricted to a maximum value.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard E. Schenker "Effects of phase-shift masks on across-field linewidth control", Proc. SPIE 3679, Optical Microlithography XII, (26 July 1999); https://doi.org/10.1117/12.354332
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Optical lithography

Binary data

Critical dimension metrology

Lithography

Phase shifts

Calibration

RELATED CONTENT

Patterning 80 nm gates using 248 nm lithography an...
Proceedings of SPIE (September 14 2001)
Effect of phase error on 180 nm and 250 nm...
Proceedings of SPIE (July 28 1997)
Full field imaging with a 157-nm scanner
Proceedings of SPIE (May 28 2004)

Back to Top