Paper
5 June 2001 Challenges facing 3D information extraction by CD-SEM and scatterometry
Author Affiliations +
Abstract
The accelerated reduction in feature size and the use of Damascene and advanced etching of gate electrodes is greatly challenging critical dimension and defect review metrology. These issues are discussed in the International Technology Roadmap for Semiconductors' Metrology Roadmap. Scanning electron microscopes (SEM) now require 3D imaging and metrology capability and other methods such as scatterometry and CD-AFM provide sidewall angle. Recent evaluation of the depth of field of SEM is below the typically expected micron range. In addition, improving precision, which is directly tied to resolution, can be done only at the expense of either beam voltage or depth of filed field. This greatly limits the application of CD-SEM to sub 70 nm technology generations (logic gates of 45 nm) unless a breakthrough in technology is achieved. Other methods also face challenges. Scatterometry is being extended to provide more than just the typical flat sidewall angle for advanced gate geometries. Metal gates seem to be a tremendous challenge considering that the relative transparency of poly silicon allows scatterometry an advantage. In this paper, the limitations of SEM, scatterometry, and AFM will be discussed in terms of future measurement requirements. An attempt to include new materials, such as porous low k interconnects, in this discussion will also be done.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alain C. Diebold "Challenges facing 3D information extraction by CD-SEM and scatterometry", Proc. SPIE 4275, Metrology-based Control for Micro-Manufacturing, (5 June 2001); https://doi.org/10.1117/12.429349
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Critical dimension metrology

Scatterometry

Scanning electron microscopy

3D metrology

Metrology

Control systems

Optics manufacturing

Back to Top