Paper
27 December 2001 Measurement of the dynamic deformation of a high-frequency scanning mirror using a Shack-Hartmann wavefront sensor
Author Affiliations +
Abstract
Scanning mirrors for micro-display systems typically require operation at frequencies over 15 kHz. These mirrors undergo large dynamic stresses and inertia related deformations. We report here on the measurement of these dynamic deformations using a commercially available Shack-Hartmann wavefront sensor with data reduction software. The measured deformations using the Shack-Hartmann wavefront sensor are shown to agree with measurements obtained using a stroboscopic interferometer. Advantages of the Shack- Hartmann wavefront sensor are discussed.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Margaret K. Brown, Timothy J. Gong, Daniel R. Neal, James P. Roller, Selso Luanava, and Hakan Urey "Measurement of the dynamic deformation of a high-frequency scanning mirror using a Shack-Hartmann wavefront sensor", Proc. SPIE 4451, Optical Manufacturing and Testing IV, (27 December 2001); https://doi.org/10.1117/12.453645
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Wavefront sensors

Wavefronts

Interferometers

Finite element methods

CCD image sensors

Sensors

RELATED CONTENT

Adaptive optical system for laser beam formation
Proceedings of SPIE (April 24 2018)
An alignment strategy for the optics of LINC-NIRVANA
Proceedings of SPIE (September 24 2012)
Performance analysis of Shack-Hartmann wavefront sensor
Proceedings of SPIE (December 31 2008)
Testing of aspheric surfaces
Proceedings of SPIE (November 09 2001)
Phase-shift Fizeau interferometer in presence of vibration
Proceedings of SPIE (August 11 2008)
Advanced wavefront sensing and control testbed (AWCT)
Proceedings of SPIE (July 22 2010)

Back to Top