Paper
29 May 2002 Effect of length of carbon fiber sheet on the stress field of the reinforced concrete three-point bending specimen with a V notch
Peiyan Huang, Ming Jin, Lifeng Luo, Shengmin Hu, Guisen Zhang
Author Affiliations +
Proceedings Volume 4537, Third International Conference on Experimental Mechanics; (2002) https://doi.org/10.1117/12.468796
Event: Third International Conference on Experimental Mechanics, 2002, Beijing, China
Abstract
Affixing high strength fiber-sheet is an advanced method to reinforce or repair the concrete structures. In this paper, the theoretical analysis and FEM are used to discuss the effects of carbon fiber-sheet (CFS) on the stress field of the reinforced concrete 3-point bending specimens with V-notch. The results show that affixing CFS to the bottom of the specimen can change the stress distribution and failure mode of the specimen. The failure mode of CFS reinforced concrete specimen is determined by the location and size of the 'over-stress area' on the concrete side of the interface between concrete member and CFS. Moreover, the location and size of the 'over-stress area' is affected greatly by the length, L, of the CFS. Therefore, to improve the load- carrying capacity of the specimen, the 'over-stress area' on the concrete side of the interface should be within the affixing length of CFS. The length of the CFS should satisfy the requirement: L/S >= 3/4.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peiyan Huang, Ming Jin, Lifeng Luo, Shengmin Hu, and Guisen Zhang "Effect of length of carbon fiber sheet on the stress field of the reinforced concrete three-point bending specimen with a V notch", Proc. SPIE 4537, Third International Conference on Experimental Mechanics, (29 May 2002); https://doi.org/10.1117/12.468796
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Finite element methods

Carbon

Failure analysis

Structured optical fibers

Lithium

Interfaces

Epoxies

Back to Top