Paper
11 March 2002 Impact of graybeam method of virtual address reduction on image quality
Author Affiliations +
Abstract
In both optical and electron beam raster scan imaging for mask making or direct write on wafer, graybeam techniques are used to create a small virtual address grid while maintaining a large physical address grid. Using simple simulations of aerial image formation as the summation of Gaussian spots, several important conclusions about the use of graybeam are made. Graybeam results in a non-linear variation in edge position with gray level, with the non- linearity increasing with larger physical address grid size. While this edge position deviation form non-linearity can be calibrated out of the writing tool, the calibration curve is process dependent. One problem with the use of graybeam is the reduction of image quality as expressed by the image log-slope. For the case of a physical address grid equal to half of the spot size, the worst case graybeam level has an image log-slope at the edge that is 20 percent less than the best case.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chris A. Mack "Impact of graybeam method of virtual address reduction on image quality", Proc. SPIE 4562, 21st Annual BACUS Symposium on Photomask Technology, (11 March 2002); https://doi.org/10.1117/12.458331
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Image quality

Calibration

Image processing

Raster graphics

Image acquisition

Mask making

Electron beams

Back to Top