Novel heat dissipation approach for high-powered miniature robots

Sylvain M. Martel; Jonathan Embler; Stefen Riebel; Jonathan Gibbons; Ian Warwick Hunter

doi:10.1117/12.444131

8 October 2001 Novel heat dissipation approach for high-powered miniature robots

Sylvain M. Martel, Jonathan Embler, Stefen Riebel, Jonathan Gibbons, Ian Warwick Hunter

Proceedings Volume 4568, Microrobotics and Microassembly III; (2001) https://doi.org/10.1117/12.444131
Event: Intelligent Systems and Advanced Manufacturing, 2001, Boston, MA, United States

Abstract

Bringing instruments capable of atomic scale operations in the form of miniature wireless robots yields very high-density powered electronics. As the robots are further miniaturized, the surface area available for heat dissipation becomes inadequate to maintain continuous operation of the onboard electronics. Typical approaches such as increasing the surface area by mounting a heat sink is not an option since it would increase substantially the overall size of the robot. The overall size has to be minimized to allow a larger fleet of miniature robots to operate simultaneously in the same area. A larger fleet translates to higher throughput for mass-scale atomic-level operations. To solve this issue, we have implemented a special skin in contact with the high-powered flexible electronic circuit surrounding the robot's body. The skin effectively dissipate heat by evaporating distilled water stored in a few layers of flexible patterned wiping fabric designed for maximum water absorption and encapsulated between an inner thin layer of thermally conductive elastometer and an outer thin layer of an heat conducting metal sheet. Without the skin, past experiments have shown that each robot would operate for approximately 10 seconds before shutting down. With a 1-mm thick skin on a 32-mm diameter size robot, experimental results have shown that each robot could operate up to approximately 5 minutes between refills. A thicker water absorption layer is not a valid option since it would increase the overall size of the robot. A refill methodology suitable for this environment is also described.

Citation Download Citation

Sylvain M. Martel, Jonathan Embler, Stefen Riebel, Jonathan Gibbons, and Ian Warwick Hunter "Novel heat dissipation approach for high-powered miniature robots", Proc. SPIE 4568, Microrobotics and Microassembly III, (8 October 2001); https://doi.org/10.1117/12.444131

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available