Paper
7 June 2002 Characterization of miniaturized tensile specimens using micromagnetic techniques
Henrik Roesner, Norbert Meyendorf
Author Affiliations +
Abstract
Miniaturized dogbone tensile specimens are used to determine mechanical properties when only a small amount of material is available. Because of the high surface to volume ratio, surface finishing becomes critical for specimens with diameters less than 2 mm. Barkhausen noise technique was used to characterize the machined surfaces of small diameter tensile specimens. Full surface scans were conducted using a new magnetization technique. The Barkhausen noise profile curves for several different analyzing frequencies were compared to those obtained on electro-polished specimens using correlation techniques in order to characterize the penetration depth of the surface treatment.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Henrik Roesner and Norbert Meyendorf "Characterization of miniaturized tensile specimens using micromagnetic techniques", Proc. SPIE 4703, Nondestructive Evaluation and Reliability of Micro- and Nanomaterial Systems, (7 June 2002); https://doi.org/10.1117/12.469618
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Magnetism

Surface finishing

Microscopy

Sensors

Nondestructive evaluation

Correlation function

Curium

RELATED CONTENT

Correlation plenoptic imaging
Proceedings of SPIE (June 26 2017)
Quantum microscopy of nanoscale magnetism
Proceedings of SPIE (January 01 1900)
Photothermal multi-pixel imaging microscope
Proceedings of SPIE (June 10 2004)
Magnetic microscopy using SQUIDs
Proceedings of SPIE (July 02 1994)

Back to Top