Paper
16 October 1984 Strength, Toughness And Fracture Initiation Of Fluoride Glasses
Carl C.M. Wu, Dave Lewis, Karl R. McKinney
Author Affiliations +
Proceedings Volume 0484, Infrared Optical Materials and Fibers III; (1984) https://doi.org/10.1117/12.943145
Event: 1984 Technical Symposium East, 1984, Arlington, United States
Abstract
A ZBLAL fluoride glass produced at NRL was characterized mechanically both in bulk and fiber forms. Fracture toughness measurements gave Ki values of 0.38 ± 0.05 MPa.m1/2, about 1/2 that of Si02 glasses. Flexural strength of machined bars of the current ZBLAL glasses was about 60MPa, about 80% of similarly finished silicate glasses. While the fluoride glass has lower strength than Si02 glass, it had much less slow crack growth, which should give it a longer useful life over a range of stresses. Although the average tensile strength of fibers from initial fiber drawing trials was only about 170 MPa, fractographic examinations indicated that the useful strength of this fiber could be raised considerably with improved processing.
© (1984) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Carl C.M. Wu, Dave Lewis, and Karl R. McKinney "Strength, Toughness And Fracture Initiation Of Fluoride Glasses", Proc. SPIE 0484, Infrared Optical Materials and Fibers III, (16 October 1984); https://doi.org/10.1117/12.943145
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Silica

Adaptive optics

Mirrors

Infrared radiation

Infrared materials

Corrosion

RELATED CONTENT

Aluminate Glasses - A Review
Proceedings of SPIE (July 18 1988)
Mechanical Properties Of IR Glasses And Fibers
Proceedings of SPIE (January 01 1987)
Material Dispersion Considerations For Infrared Fibers
Proceedings of SPIE (December 17 1982)

Back to Top