Paper
9 September 2002 Digital signal processing for fluorescence-based fiber optic temperature sensor
Author Affiliations +
Abstract
The monitoring of the fluorescence lifetime of selected materials has been one of the more successful schemes in optical fiber temperature sensing. In principle, both the rise of the fluorescent signal at constant excitation and its decay are described by a first-order exponential, where the time constant ? is a function of the temperature. However few corrections must be introduced to account for instrumental contributions resulting in a baseline offset B, noise and radiation leakage from the excitation source into the detection channel. These corrections can be better applied by means of a digital signal processing circuit. The system uses modified digital phase sensitive detection with phase locked to a fixed value and the modulation period tracking the measured lifetime. It can compensate for correlated and uncorrelated offsets of the decay signal and to work with very low signal-to-noise ratio. The test results give a typical resolution of 0. 1 % for decay. Such a system has been applied to measuring the fluorescence decay time of a chromium-doped YAG crystal used as s sensing element of a optical fiber thermometer The calibration of the thermometer has shown a temperature resolution of 0. 1 0C from OC to 100 0C.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chunhai Hu and Yutian Wang "Digital signal processing for fluorescence-based fiber optic temperature sensor", Proc. SPIE 4920, Advanced Sensor Systems and Applications, (9 September 2002); https://doi.org/10.1117/12.481954
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital signal processing

Luminescence

Phase shift keying

Sensors

Signal processing

Control systems

Fiber optics

Back to Top