InP-membrane photonic devices

Pierre Viktorovitch; Michel Garrigues; Jean Louis Leclercq; Xavier Letartre; Pedro Rojo-Romeo; Christian Seassa

doi:10.1117/12.473284

11 March 2003 InP-membrane photonic devices

Pierre Viktorovitch, Michel Garrigues, Jean Louis Leclercq, Xavier Letartre, Pedro Rojo-Romeo, Christian Seassa

Proceedings Volume 4947, Laser Diodes, Optoelectronic Devices, and Heterogenous Integration; (2003) https://doi.org/10.1117/12.473284
Event: Photonics Fabrication Europe, 2002, Bruges, Belgium

Abstract

The general objective of this presentation is to demonstrate the great potential of InP-membrane photonic devices, with a special emphasis on applications for Optical Communications. Various classes of devices will be presented, which are based on MOEMS (Micro-Opto-Electro-Mechanical) structures, or 2 dimensional (2D)photonic crystals (PC) or a combination of both, according to a '2.5-dimensional' approach, which should broaden considerably the combinations of functionality beyond those presently contemplated with the two first classes. For the MOEMS devices, the basic building block consists in a multi-air-gap/suspended-membrane structure, which can be micro-machined using multi-layered III-V semiconductor based heterostructures : tunable filters will be presented for illustration. For PC devices, the basic building block consists in an InP (and related material) membrane including a 2D PC formed by a lattice of holes : the membrane is either suspended in air or bonded onto low index material, e.g. silica on silicon substrate, in the prospect of heterogeneous integration with silicon based microelectronics. Examples of devices will be presented, specifically micro-lasers based on 2D PC micro-cavities as well as on 2D in plane Bloch modes (2D Distributed-Feed-Back micro-laser). For the '2.5-dimensional' photonic structures, it will be shown that the multi-layer membrane approach, where individual layers or combinations of layers may be structured across to form a 2D PC, is naturally suitable for this purpose. Examples of devices will be presented (2D PC surface emitting micro-sources, switching devices combining vertical MOEMS multi-layer membrane structures and 2D PC).

Citation Download Citation

Pierre Viktorovitch, Michel Garrigues, Jean Louis Leclercq, Xavier Letartre, Pedro Rojo-Romeo, and Christian Seassa "InP-membrane photonic devices", Proc. SPIE 4947, Laser Diodes, Optoelectronic Devices, and Heterogenous Integration, (11 March 2003); https://doi.org/10.1117/12.473284

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available