Paper
2 June 2003 Atomic force microscopy of steep side-walled feature with carbon nanotube tip
Author Affiliations +
Abstract
The characteristics of the carbon nanotube AFM tip was investigated as it is used to measure the critical dimensions in the high aspect ratio structures. The research has been done to demonstrate the limitations of the CNT probe in imaging steep or vertical sidewall. Two kinds of samples, silicon dot and the lines in the ArF resist pattern were profiled by using carbon nanotube tip in the tapping mode AFM. There is a large oscillation at the steep sidewall, which cannot be controlled by merely changing scan variables, except by slowing down the scan up to the impractical level. The interaction between the long, slim CNT probe and the vertical sidewall severely limits the usefulness of AFM as a CD metrology tool. To achieve hi-resolution and high aspect ratio imaging simultaneously, a stiffer and/or modifed probe under clever non-contact 2D feedback is needed.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Byong Chon Park, Jae-Hyun Kang, Ki Young Jung, Won Young Song, Beomhoan O, and TaeBong Eom "Atomic force microscopy of steep side-walled feature with carbon nanotube tip", Proc. SPIE 5038, Metrology, Inspection, and Process Control for Microlithography XVII, (2 June 2003); https://doi.org/10.1117/12.482816
Lens.org Logo
CITATIONS
Cited by 13 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Atomic force microscopy

Carbon nanotubes

Silicon

Critical dimension metrology

Adsorption

Silicon carbide

Metrology

Back to Top