Paper
28 August 2003 Practical approach for AAPSM image imbalance correction for sub-100-nm lithography
Author Affiliations +
Abstract
In our previously published work, we investigated alternating-aperture PSM image intensity imbalance as function of various mask and optical parameters using rigorous electro-magnetic field (EMF) simulations. Results suggested that the imbalance could be effectively compensated through application of an optimized combination of undercut and a constant phase-shifter bias. In the effort of development and implementation of a production-ready image imbalance correction methodology, it is important to validate the accuracy of simulation-based predictions through correlation of results to experimental data. For this purpose, a test reticle containing various mask parameters as variables was designed and manufactured. The experimental data was obtained from SEM measurements of the exposed wafers, and results were compared to rigorous EMF simulation data. Based on results obtained, we propose and validate an image imbalance correction methodology to be implemented within the framework of the PSM - OPC manufacturing flow.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hung Lin Cho, Shu Yi Lin, Frank Hsieh, Armen Kroyan, Hua-Yu Liu, Jason H. Huang, Shu-Hao Hsu, I-Hsiung Huang, Benjamin Szu-Min Lin, and Kuei-Chun Hung "Practical approach for AAPSM image imbalance correction for sub-100-nm lithography", Proc. SPIE 5130, Photomask and Next-Generation Lithography Mask Technology X, (28 August 2003); https://doi.org/10.1117/12.504393
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Chromium

Critical dimension metrology

Manufacturing

Lithography

Semiconducting wafers

Reticles

RELATED CONTENT

Back to square 9 a demonstration of 9 in....
Proceedings of SPIE (December 27 2002)
Manufacturability of a 0.18-um OPC technology
Proceedings of SPIE (August 25 1999)
Aerial image measuring system at 193 nm a tool...
Proceedings of SPIE (December 06 2004)
Minimizing yield-loss risks through post-OPC verification
Proceedings of SPIE (October 20 2006)

Back to Top