Paper
14 October 2003 Utilization of speckle techniques at measurements of biomechanical characteristics of cadaverous human lumbar spine samples after application of various surgical fixation methods
Ludek Bartonek, Jiri Keprt Sr., Jiri Charamza, Lumir Hrabalek
Author Affiliations +
Abstract
Special equipment was realized for testing of stabilization methods of samples of lower part of the spine (L1-L5). During straining and measurement of the rigidity of the sample as a whole it is also necessary to observe the movement of individual parts of the sample. This movement is non-contact followed with the help of round targets connected to the appropriate vertebra to be observed. The watched targets are lit with a lamp or laser, and are identified by two CCD cameras. An optical signal is brought into a computer and evaluated by the fast Fourier transformation method. The period and direction of interference fringes determine the size and the direction of the shift.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ludek Bartonek, Jiri Keprt Sr., Jiri Charamza, and Lumir Hrabalek "Utilization of speckle techniques at measurements of biomechanical characteristics of cadaverous human lumbar spine samples after application of various surgical fixation methods", Proc. SPIE 5143, Novel Optical Instrumentation for Biomedical Applications, (14 October 2003); https://doi.org/10.1117/12.500040
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spine

Measurement devices

Target detection

CCD cameras

Fourier transforms

Speckle

Biomedical optics

Back to Top