Paper
1 March 1974 Applications Of Galvanometers To Laser Scanning
Pierre J. Brosens, Edward P. Grenda
Author Affiliations +
Abstract
Most laser scanning systems require that the angular position of the laser beam be controlled by a pivoted mirror with a diameter of several millimeters. The requirements of speed and accuracy with which this function must be fulfilled in most systems have led to the development of compact servo-actuated galvanometers of a novel design. Such devices are capable of rotating mirrors 7.5 to 30mm in diameter, through steps of 20 degrees, in times of less than 0.5 to 4 milliseconds, respectively. They have a positional linearity in excess of 0.1%, excellent shock and vibration resistance characteristics, and will operate free of maintenance for over 10" scan cycles. Current uses in newspaper photo transmission, engraving of printing plates, resistor trimming of thick film circuits, label marking and other scanning applications are described briefly.
© (1974) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pierre J. Brosens and Edward P. Grenda "Applications Of Galvanometers To Laser Scanning", Proc. SPIE 0053, Laser Recording and Information Handling Technology I, (1 March 1974); https://doi.org/10.1117/12.954198
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser scanners

Scanners

Mirrors

3D scanning

Resistors

Electrodes

Magnetism

RELATED CONTENT

MEMS in the lens 3D beam scanner for in vivo...
Proceedings of SPIE (March 04 2019)
A novel 24 kHz resonant scanner for high resolution laser...
Proceedings of SPIE (January 22 2005)
Low Wobble Resonant Scanners
Proceedings of SPIE (September 20 1982)
Quantizing Laser Scanner Performance By Signature Analysis
Proceedings of SPIE (November 27 1984)

Back to Top