Paper
29 April 2004 CD error budget analysis in ArF lithography
Author Affiliations +
Abstract
As for CD (Critical Dimension) control, we classified factors of CD variations in each process. We quantified the factors occurred in the devices such as exposure tool, coater/developer and CD-SEM in 193nm lithography. In the coater/developer, influence of PEB (Post Exposure Bake) on CD variation was notably found and made up about 70% of the Track-related factors. This fact indicates that a great importance of PEB in 193nm process. Regarding the exposure tool, we quantified the CD variations caused by Flare using Kirk method. We determined that this issue was influenced by the exposure field layout, and the variation of intra wafer was 1.58nm. As for a CD-SEM, we measured the CD variations caused by the electron beam-induced CD shrink, and LWR (Line Width Roughness). The LWR accounts for about 40% of the total measurement errors, and affects CD variations higher as finer line pattern. We reduced influence of LWR on CD variations by extending measurement points and averaging. Thus we acquired the CD uniformity close to the actual CD.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takahisa Otsuka and Kazuo Sakamoto "CD error budget analysis in ArF lithography", Proc. SPIE 5378, Data Analysis and Modeling for Process Control, (29 April 2004); https://doi.org/10.1117/12.534582
Lens.org Logo
CITATIONS
Cited by 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Critical dimension metrology

Semiconducting wafers

Line width roughness

Diamond patterning

Error analysis

Lithography

Electron beams

RELATED CONTENT


Back to Top