Paper
3 November 2004 Kinetic redundancy in dye-sensitized solar cells: the use of high-bandgap metal oxide barrier layers
Emilio Palomares, Alex Green, Saif A. Haque, James R. Durrant
Author Affiliations +
Abstract
Control of charge interfacial charge transfer is central to the design of photovoltaic devices. A an elegant approach to control those dynamics, is the use of an insulating metal oxide blocking layer at a nanocrystalline inorganic / organic semiconductor interface. We show that the conformal growth of a ~1 nm thick overlayer of MgO on a preformed nanocrystalline SnO2 film results in a ~4-fold retardation in the rate of charge recombination at such an interface This observation shows a good correlation with the current/voltage characteristics of dye sensitised nanocrystalline solar cells fabricated from such films, with the MgO coating resulting in ~ 50% improvement in overall device efficiency.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Emilio Palomares, Alex Green, Saif A. Haque, and James R. Durrant "Kinetic redundancy in dye-sensitized solar cells: the use of high-bandgap metal oxide barrier layers", Proc. SPIE 5520, Organic Photovoltaics V, (3 November 2004); https://doi.org/10.1117/12.557172
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Dye sensitized solar cells

Metals

Interfaces

Oxides

Solar cells

Liquids

RELATED CONTENT

The Manufacture Of Amorphous Silicon Photovoltaic Modules
Proceedings of SPIE (September 08 1983)
Photovoltaic fibers
Proceedings of SPIE (November 15 2006)
Interfacial processes in organic-based solar cells
Proceedings of SPIE (February 21 2002)

Back to Top