Paper
20 October 2004 Successful design of PV power systems for solid-state lighting applications
John P. Thornton, Byron Stafford
Author Affiliations +
Abstract
Modern light-emitting diode (LED) technology holds great promise for remote or stand-alone photovoltaic (PV) lighting applications. Acceptable intensities can be obtained for a fraction of the energy consumed by incandescent or fluorescent lighting, resulting in smaller and less costly PV/battery systems. Applying PV technology to solid-state applications seems straightforward at first glance. Yet, all too often, PV-powered products fall short of expectations. There can be many reasons for failure. As often as not, we find that failure results from misunderstanding or ignoring well-established principles of PV system design, or by assuming maintenance is unnecessary because of PV's apparent simplicity. Most of these fatal errors have simple and easily applied solutions. The most common fatal errors are discussed, and approaches are recommended that can help ensure a successfully operating system. The methodology described below is applicable to all sizes of PV power systems, ranging from one needed for a single LED to one capable of supplying many kilowatts.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John P. Thornton and Byron Stafford "Successful design of PV power systems for solid-state lighting applications", Proc. SPIE 5530, Fourth International Conference on Solid State Lighting, (20 October 2004); https://doi.org/10.1117/12.565278
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photovoltaics

Solar cells

Light sources and illumination

Manufacturing

Solar energy

Solid state lighting

Light emitting diodes

Back to Top