Paper
4 November 2005 A study of Cr to Mosi in situ dry etching process to reduce plasma induced defect
Author Affiliations +
Abstract
Dry etching process is widely used in semiconductor field and in photomask manufacturing. Even though dry etching technique can be much better in obtaining straight profile and better CD (Critical Dimension) uniformity than wet etching technique, it has a severe problem in terms of defect issue. Especially, very tough controllability of defects is essential for the photomask dry etching process because defect can be printed on the wafer over. Therefore, we studied defect free photomask etching techniques and found out the possibility of particle evasion. With In-situ etching method, defect generation by MoSiON etching could be reduced compared to when standard etching process is used while the process result is almost same as that of the standard process. In this paper, we will present the experimental result of in-situ. dry etching process technique for Cr and MoSiON, which reduces the defect level significantly.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Il-Yong Jang, Young-Ju Park, Hyuk-Joo Kwon, Seong-Yong Moon, Seong-Woon Choi, and Woo-Sung Han "A study of Cr to Mosi in situ dry etching process to reduce plasma induced defect", Proc. SPIE 5992, 25th Annual BACUS Symposium on Photomask Technology, 59920O (4 November 2005); https://doi.org/10.1117/12.631951
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Chromium

Particles

Plasma

Chlorine

Reactive ion etching

Dry etching

Back to Top