Paper
29 January 2007 Simultaneous strain and temperature measurement system with fiber Bragg grating
Dandan Zhu, Zhiquan Li, Fu Sun, Xiuxian Tian, Haifang Wang
Author Affiliations +
Proceedings Volume 6279, 27th International Congress on High-Speed Photography and Photonics; 627968 (2007) https://doi.org/10.1117/12.725726
Event: 27th International congress on High-Speed Photography and Photonics, 2006, Xi'an, China
Abstract
Simultaneous strain and temperature measurement system with fiber Bragg grating was presented in this paper. The light from broadband source (BBS) was coupled into sensing probe through 3dB coupler1. Reflective light of two FBGs was split through coupler2 and went into chirped gratings with different pass-band. Demodulation method adopted chirped grating and long period grating edge linear filtering technology. It can send each reflected spectrum to different edge filter. It makes every FBG's reflective spectrum was demodulate. The central reflected wavelength of two FBGs was 1546.15nm and 1554.17nm respectively. Through simulation experiment, we can get that (formula available in manuscript). Strain measurement ranged from 0 to 2000 με. Temperature measurement ranged from 0 to 200°C.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dandan Zhu, Zhiquan Li, Fu Sun, Xiuxian Tian, and Haifang Wang "Simultaneous strain and temperature measurement system with fiber Bragg grating", Proc. SPIE 6279, 27th International Congress on High-Speed Photography and Photonics, 627968 (29 January 2007); https://doi.org/10.1117/12.725726
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Temperature metrology

Linear filtering

Optical filters

Fourier transforms

Demodulation

Fiber optics sensors

Back to Top