Potential and range of application of elastic backscatter lidar systems using polarization selection to minimize detected skylight noise

S. A. Ahmed; Y. Y. Hassebo; B. Gross; M. Oo; F. Moshary

doi:10.1117/12.689175

5 October 2006 Potential and range of application of elastic backscatter lidar systems using polarization selection to minimize detected skylight noise

S. A. Ahmed, Y. Y. Hassebo, B. Gross, M. Oo, F. Moshary

Author Affiliations +

Proceedings Volume 6367, Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing II; 636709 (2006) https://doi.org/10.1117/12.689175
Event: SPIE Remote Sensing, 2006, Stockholm, Sweden

Abstract

We examine the potential, range of application, and limiting factors of a polarization selection technique, recently devised by us, which takes advantage of naturally occurring polarization properties of scattered sky light to minimize the detected sky background signal and which can be used in conjunction with linearly polarized elastic backscatter lidars to maximize lidar receiver SNR. In this approach, a polarization selective lidar receiver is aligned to minimize detected skylight, while the polarization of the transmitted lidar signal is rotated to maintain maximum lidar backscatter signal throughput to the receiver detector, consequently maximizing detected signal to noise ratio. Results presented include lidar elastic backscatter measurements, at 532 nm which show as much as a factor of √10 improvement in signal-to-noise ratio over conventional un-polarized schemes. For vertically pointing lidars, the largest improvements are limited to symmetric early morning and late afternoon hours. For non-vertical scanning lidars, significant improvements are achievable over much more extended time periods, depending on the specific angle between the lidar and solar axes. A theoretical model that simulates the background skylight within the single scattering approximation showed good agreement with measured SNR improvement factors. Diurnally asymmetric improvement factors, sometimes observed, are explained by measured increases in PWV and subsequent modification of aerosol optical depth by dehydration from morning to afternoon. Finally, since the polarization axis follows the solar azimuth angle even for high aerosol loading, as demonstrated using radiative transfer simulations, it is possible to conceive automation of the technique. In addition, it is shown that while multiple scattering reduces the SNR improvement, the orientation of the minimum noise state remains the same.

Citation Download Citation

S. A. Ahmed, Y. Y. Hassebo, B. Gross, M. Oo, and F. Moshary "Potential and range of application of elastic backscatter lidar systems using polarization selection to minimize detected skylight noise", Proc. SPIE 6367, Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing II, 636709 (5 October 2006); https://doi.org/10.1117/12.689175

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available