Paper
19 October 2006 Low-cost deformable mirror for laser focussing
W. Greger, T. Hösel, T. Fellner, A. Schoth, C. Mueller, J. Wilde, H. Reinecke
Author Affiliations +
Proceedings Volume 6374, Optomechatronic Actuators, Manipulation, and Systems Control; 63740F (2006) https://doi.org/10.1117/12.685206
Event: Optics East 2006, 2006, Boston, Massachusetts, United States
Abstract
This paper presents a new concept of low degree-of-freedom deformable mirrors. The application of the mirror is the focusing of a laser beam, featuring a variable focal length. The deformation shape, which is in this case a circular parabolic and an elliptical parabolic respectively, is achieved by a local variation of the mirror's thickness. The paper explains the analytical treating of the mirror's thickness distribution as well as an iterative approximation procedure using FEM simulation. The mirrors were fabricated using hot embossing and injection molding technology. The molds required are made from steel whereas the structuring is done by conventional milling. The fabricated mirrors were coated with a reflective gold layer. For deformation measurements a functional demonstrator consisting of the coated mirror, assembly plates and an electromagnetic actuator was produced. The deformation of the mirror was measured using a 3D coordinate measuring machine. The optical function was characterized by a CCD laser measurement setup. Deviation between the measured and the optimal deformation function was sufficiently small. The spot size of the focused laser beam was up to 470 μm whereas the focal length could be varied in a range of 250 mm to 1000 mm. Due to the use of polymeric material, the long time behavior in respect of creep was researched using FEM simulations as well as endurance tests.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W. Greger, T. Hösel, T. Fellner, A. Schoth, C. Mueller, J. Wilde, and H. Reinecke "Low-cost deformable mirror for laser focussing", Proc. SPIE 6374, Optomechatronic Actuators, Manipulation, and Systems Control, 63740F (19 October 2006); https://doi.org/10.1117/12.685206
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Actuators

Polymers

Finite element methods

Deformable mirrors

3D metrology

CCD cameras

RELATED CONTENT


Back to Top