The effect of intra-field CD uniformity control (CDC) on mask birefringence

Guy Ben-Zvi; Eitan Zait; Vladimir Krugliakov; Vladimir Dmitriev; Gidi Gottlieb; Sergey Oshemkov

doi:10.1117/12.736965

3 May 2007 The effect of intra-field CD uniformity control (CDC) on mask birefringence

Guy Ben-Zvi, Eitan Zait, Vladimir Krugliakov, Vladimir Dmitriev, Gidi Gottlieb, Sergey Oshemkov

Proceedings Volume 6533, 23rd European Mask and Lithography Conference; 65330G (2007) https://doi.org/10.1117/12.736965
Event: European Mask and Lithography Conference2007, 2007, Grenoble, France

Abstract

Mask and Wafer CD Uniformity (CDU) improvement by utilizing an ultrafast laser system for writing shading elements inside the bulk of Quartz (Qz) Photomasks has previously been shown to be an effective and practical application (1). The CD Control ( CDC) Process is working in production environments for 90 and 65 nm design rule processes which utilize KrF and ArF scanners. Advanced design rule nodes at 45 and 32 nm will utilize high and hyper NA immersion lithography, which require highly polarized light and immersion technology. Maintaining a high degree of polarization requires low birefringence (BF) of the optical path and specifically of the mask. Current mask blanks contribute between 5 to 20 nm of BF which is too high for polarized systems. This lead to the recent introduction of special low BF blanks which provide <1nm BF per mask. The CDC Process which introduces an optical element inside the quartz (Qz) mask performs a local change of the bulk Qz morphology which causes a local change in refractive index of the Qz and may induce some local BF. The induced BF, if too high, may potentially cause depolarization of the highly polarized light of hyper NA scanners. Depolarizing the light by a high degree has the potential to degrade the image contrast in the litho process The current study examined the effect of the CDC Process on the mask BF at 193 nm by writing controlled attenuation shading elements inside special low BF Qz blanks and measuring the BF induced by the CDC Process. Results: It was found that BF induced by the CDC Process is so small that its effect on loss of CDU is negligible compared to the gain in CDU. This will allow mask and IC manufactures to take advantage of Pixer's CDC Process in hyper NA litho processes at 45 and 32 nm nodes.

Citation Download Citation

Guy Ben-Zvi, Eitan Zait, Vladimir Krugliakov, Vladimir Dmitriev, Gidi Gottlieb, and Sergey Oshemkov "The effect of intra-field CD uniformity control (CDC) on mask birefringence", Proc. SPIE 6533, 23rd European Mask and Lithography Conference, 65330G (3 May 2007); https://doi.org/10.1117/12.736965

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available