Paper
27 September 2007 Fabrication of low band-gap polymer solar cells using chemical vapor deposition polymerization
Chun-Young Lee, Michael H.-C. Jin
Author Affiliations +
Abstract
For the first time, insoluble poly(isothianaphthene-3,6-diyl) (PITN(3,6)) thin-film has been successfully deposited from 3,4-diethynylithiophene via chemical vapor deposition polymerization. PITN(3,6) with an optical band-gap of about 1.8 eV, is a conjugated polymer with its backbone constructed through phenyl rings. The low band-gap was expected from an idea that the quinoid state of the polymer could be stabilized by the thiophene ring fused into the phenyl ring. Electrochemical analysis further provided the highest occupied molecular orbital and the lowest unoccupied molecular orbital levels with values of 5.0 eV and 3.2 eV respectively. PITN(3,6) was also synthesized through more conventional liquid-solution based synthesis (Bergmann cyclization). The structural analysis showed there were undesirable side reactions during the process leaving terminal alkyne groups and five membered thiophene rings within PITN(3,6) thin-film while PITN(3,6) deposited by CVDP showed very clean structure. Finally, a bi-layer heterojunction between carbonized poly(p-phenylenevinylene) and PITN(3,6) was fabricated. Without optimization, an open circuit voltage of about 300 mV was measured. Ultimately, CVDP can realize multi-layer organic optoelectronic devices on any platform because of its low substrate temperature and highly conformal coating capability.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chun-Young Lee and Michael H.-C. Jin "Fabrication of low band-gap polymer solar cells using chemical vapor deposition polymerization", Proc. SPIE 6656, Organic Photovoltaics VIII, 66560Y (27 September 2007); https://doi.org/10.1117/12.734839
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Solar cells

Thin films

Polymerization

Heterojunctions

Chemical vapor deposition

Molecules

Back to Top