Paper
14 November 2007 Q-switched Yb-doped rod-type photonic crystal fiber laser
Author Affiliations +
Proceedings Volume 6722, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 67220H (2007) https://doi.org/10.1117/12.782842
Event: 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 2007, Chengdu, China
Abstract
Rod-type photonic crystal fibers (PCFs) bring enormous advantages in Q-switched fiber laser with high pulse energy, short pulse width and good beam quality for its large mode area and short fiber length. In this paper, an acoustic-optic Q-switched photonic crystal fiber laser was investigated by using a 1m-long Yb-doped large mode area rod-type photonic crystal fiber as gain medium. A maximum pulse energy of 0.78 mJ (21.7 KW peak power) and the shortest pulse width of 20 ns were obtained at low repetition rates. A maximum 1033.6 nm average power of 14.5 W was demonstrated at 65 KHz with a slope efficiency of 56%. Further improvements would be obtained by optimizing the experiment configuration so as to achieve shorter pulse width and higher pulse energy.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shuangchen Ruan, Chunyu Guo, Peiguang Yan, Chenlin Du, and Rui Zhou "Q-switched Yb-doped rod-type photonic crystal fiber laser", Proc. SPIE 6722, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 67220H (14 November 2007); https://doi.org/10.1117/12.782842
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photonic crystal fibers

Q switched lasers

Fiber lasers

Laser crystals

Q switched fiber lasers

Cladding

Modulators

RELATED CONTENT


Back to Top