A method to determine the origin of remaining particles after mask blank cleaning

Vivek Kapila; Sean Eichenlaub; Abbas Rastegar; Arun John; Pat Marmillion

doi:10.1117/12.746798

16 November 2007 A method to determine the origin of remaining particles after mask blank cleaning

Vivek Kapila, Sean Eichenlaub, Abbas Rastegar, Arun John, Pat Marmillion

Proceedings Volume 6730, Photomask Technology 2007; 67304L (2007) https://doi.org/10.1117/12.746798
Event: SPIE Photomask Technology, 2007, Monterey, California, United States

Abstract

Extreme ultraviolet lithography (EUVL) is a strong contender for the 32 nm generation and beyond. A defect-free mask substrate is an absolute necessity for manufacturing EUV mask blanks. The mask blank substrates are, therefore, cleaned with different cleaning processes to remove all defects down to 30 nm. However, cleaning suffers from the defects added by various sources such as the fab environment, chemicals, ultra pure water, and the cleaning process itself. The charge state of the substrate during and after cleaning also contributes to the number of adder defects on the substrate. The zeta potentials on the substrate surface and the defect particles generated during the cleaning process determine whether the particles get deposited on the surface. The zeta potential of particle or substrate surfaces depends on the pH of the cleaning fluids. Therefore, in this work, pH-zeta potential maps are generated for quartz substrates during the various steps of mask cleaning processes. The pH-zeta potential maps for defect particles commonly seen on mask substrates are measured separately. The zeta potential maps of substrate and contaminant particle surfaces are used to determine whether particles are attracted to or repulsed from the substrate. In practice, this technique is especially powerful for deriving information about the origin of particles added during a cleaning process. For example, for a known adder with a negative zeta potential, all cleaning steps with a positive zeta potential substrate could be the source of added particles.

Citation Download Citation

Vivek Kapila, Sean Eichenlaub, Abbas Rastegar, Arun John, and Pat Marmillion "A method to determine the origin of remaining particles after mask blank cleaning", Proc. SPIE 6730, Photomask Technology 2007, 67304L (16 November 2007); https://doi.org/10.1117/12.746798

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available